Steampunk Beauty

BEAUTY STEAMPUNK TUTORIAL

Tutorial written by Marcia Salgado on April 15th, 2015

for those who have a working knowledge of PSP.

Any resemblance to any other tutorial is coincidental.

Do not copy and paste this tutorial anywhere on the net.

If you want to translate please ask first. 

****************************************

Material:

Tube: "Steampunk" SwanScraps, you can purchase it at PFD, here

do not use without the proper #license.

PTU Kit "Steampunk Beauty" by Dance In The Rain,

you can purchase it here 

Mask: Dee's Mask, halftone-mask-2, here 

Font: CorpusCare

****************************************

--> Remember to save often and use my tag as reference if necessary. Used the Drop Shadow: 1-1-50-5 in most layers. 

1. Create a new image 700x700. Add a new layer, select all. Open paper 5. Copy and paste into selection. Deselect. Apply Dee's mask. Merge group. Open element 107. Copy and paste as new layer. Move it down. 

2. Open element 49. Copy and paste as new layer. Select inside the frames. Expand > 4. Add a new layer. one paper 11. Copy and paste into selections. Keep selected. Open your close up. Copy and paste as new layer. Arrange the layer below frame layer. Place it inside the bigger frame. Invert selection. Delete. Open your tube and copy. Paste as new layer. Place a part of it inside one of the smaller frames. Delete. Pas your tube again and place in inside the last frame. Delete. Merge the three layers of the tube. Blend Mode: Luminance (Legacy, low the opacity to 40. Duplicate. Gaussian Blur: 4. Blend Mode: Gaussian Blur. Increase the layer opacity to 60.

3. Open element 31. resize 40%. Copy and paste as new layer. Place this layer above mask layer. Move it to left top, just leave a part of flower showing below the frame. Duplicate and move it to the right a little. Duplicate again and move it to bottom. Place the flowers around the frame. Merge all flowers layers to keep only one layer with this element.

4. Open element 110. Resize 40%. Copy and place as new layer and repeat the same process placing this flowers around the frame too. Merge these flowers layers, keep only one layer with the element.

5. Click on first layer (must be frame layer). Open element 100. Resize 40%. Mirror. Copy and paste as new layer. Move it to right an place it between the two smaller frames. Open element 127. Resize 50%. Copy and paste as new layer. Move it to left. Place it over bigger frame border. 

6. Open element 94. Resize 15%. Copy and paste as new layer. Move it to left, and pleace it over the pendent top. Open element 118. Resize 17%. Copy and paste as new layer. Move it to right top corner, place it over the frame border. Free Rotate: Left-10.

7. OPen your tube, resize irt if needed. Copy and paste as new layer. Move it a littl to right. Add a suitable shadow. Open element 16. Resize 80%. Copy and paste as new layer. Move it to bottom. add a black border of 2px. Erase some parts of the wordart to look as the tube is interlaced with it.

--> Resize if wanted. Add your copyright info and license#. 

Add your name and save as PNG.

   

Spring Delight ~ by Joanne Salgado

Tutorial written by Joanne Salgado on April 12th, 2015

for those who have a working knowledge of PSP.

Any resemblance to any other tutorial is coincidental.

Do not copy and paste this tutorial anywhere on the net.

If you want to translate please ask first. 

Tube: Lesley by Swan Scraps - you can purchase here 

Kit Spring Time by Dance In The Rain - you can purchase at PFD or Smiley Creations Shop

Font: AR CHRISTY

Don't forget to save often.

At any point if you have doubts check my tag.

1. Open a new image 500x500

2. Open element 'DITR_SPRING_TIME_ELEMENT_82' copy and paste as new layer. Resize 85%. Manual color correction with source: #00f6f2 and target: #ffffff.

3. Open element 'DITR_SPRING_TIME_ELEMENT_93' copy and paste as new layer. Arrange it to the top left. Duplicate, mirror. Duplicate, flip. Duplicate, mirror.

4. Open element 'DITR_SPRING_TIME_ELEMENT_84' copy and paste as new layer. Resize 85%. 

5. Open paper 'DITR_SPRING_TIME_PAPER_1' copy and paste as new layer. Resize 50%. Move this layer below the frame layer. Arrange inside de frame and clean all parts that show outside the frame.

6. Open element 'DITR_SPRING_TIME_ELEMENT_43' copy and paste as new layer. Move this layer below the paper layer. Arrange it to the top right of the frame. Duplicate, mirror/flip.

7. Open element 'DITR_SPRING_TIME_ELEMENT_54' copy and paste as new layer. Resize 50%. Mirror. Arrange it to the right.

8. Open element 'DITR_SPRING_TIME_ELEMENT_53' copy and paste as new layer. Resize 50%. Mirror. Arrange it to the right.

9. Open your tube. Copy and paste as new layer. Resize as you prefer and arrange it inside the frame. Clean the lower parts of the tube so it looks like is coming from inside the frame.

10. Open element 'DITR_SPRING_TIME_ELEMENT_28' copy and paste as new layer. Resize 20%. Arrange it to the top left.

11. Open element 'DITR_SPRING_TIME_ELEMENT_16' copy and paste as new layer. Resize 40%. Arrange it to the lower right of the frame. 

12. Add shadow as you prefer. I used 1-1-50-7 black.

13. Add copyright.

14. Add name. I used: AR CHRISTY | size: 60

Save as PNG

Clover Heart ~ by Joanne Salgado

Tutorial written by Joanne Salgado on February 18th, 2015

for those who have a working knowledge of PSP.

Any resemblance to any other tutorial is coincidental.

Do not copy and paste this tutorial anywhere on the net.

If you want to translate please ask first. 

Tube: Valentine by Swan Scraps - you can purchase here 

Kit My Lucky Charm by Dance In The Rain - you can purchase here and here 

Font: Bodoni MT Poster Compressed

Don't forget to save often.

At any point if you have doubts check my tag.

1. Open a new image 600x600

2. Open element 'Glitters' copy and paste as new layer.

3. Open element 'Frame 1' copy and paste as new layer. Resize 75%. Arrange it to the bottom. Rename FRAME.

4. Open element 'Clover Scatter' copy and paste as new layer. Resize 50%. Arrange it to the let. Duplicate. Mirror. Merge Down. Arrange it to the middle. Move this layer bellow the FRAME layer.

5. Open element 'Clover Balloon' copy and paste as new layer. Resize 40%. Free Rotate right-20. Arrange it to the upper right.

6. Open element 'Clover 9' copy and paste as new layer. Resize 60%. Mirror. Arrange it to the upper left near the one we just added.

7. Open element 'Clover 10' copy and paste as new layer. Resize 50%. Arrange it to the upper left.

8. Open element 'Clover 8' copy and paste as new layer. Resize 50%. Arrange it to the upper left a little bellow the one we just added.

9. Open element 'Clover Branch' copy and paste as new layer. Resize 50%. Free Rotate right-20. Arrange it to the middle right. Duplicate. Mirror. Free Rotate left-20.

10. Open paper '24' copy and paste as new layer. Resize 50%. Select layer FRAME, with magic wand select inside it. Expand 2. Invert selection. Select paper layer, hit delete on your keyboard.

11. Open your tube. I'm using Valentine from Swan Scraps. Resize as you like. Arrange it to the middle of the frame. Move this layer above the FRAME layer. Clean the parts of the tube that are outside the frame so it looks like the tube is coming from inside the frame.

12. Open element 'Bow 3' copy and paste as new layer. Resize 40%. Arrange it to the bottom above the frame bow.

13. Open element 'Clover 4' copy and paste as new layer. Clean the stem of the clover. Resize 50%. Arrange it above the bow we just added.

14. Add shadow as you like. I used 1-1-65-2 black (I added shadow only to the frame and the tube.

15. Add copyright.

16. Add name. I used: Bodoni MT Poster Compressed /Size: 60.

Save as PNG.

In My Heart ~ by Joanne Salgado

Tutorial written by Joanne Salgado on February 18th, 2015

Any resemblance to any other tutorial is coincidental.

Do not copy and paste this tutorial anywhere on the net.

If you want to translate please ask first. 

Tube: Melinda by Swan Scraps - you can purchase here 

Kit In My Heart by Dance In The Rain - you can purchase here and here

Template by Dee here 

Font: AR BONNIE

Don't forget to save often.

1. Open template. Duplicate. Close original. Delete layers: raster 1, font info, metalized w/a, wa pink, wa white, wa d/s and bg.

2. Open element '105' copy and paste as new layer. Arrange to the upper left. Layers/Arrange/Send to Bottom. Duplicate. Image/Mirror.

3. Open element '20' copy and paste as new layer. Resize 80%. Arrange it to the bottom right.

4. Open element '99' copy and paste as new layer. Resize 80%. Arrange to the upper left. Duplicate. Image/Mirror.

5. Select layer 'right red square' adjust/color balance/manual color correction (source: #ac2333 / target: #000000).

6. Open paper '20'. With the flood fill tool, change to pattern (scale: 100). Match mode: RGB Value. Colorize the layers: grey circle, left pink circle and right pink circle.

7. Select layer 'left red square' adjust/color balance/manual color correction (source: #ac2333 / target: #000000).

8. Open element '41' copy and paste as new layer. Resize 50%. Arrange it to the upper right.

9. Open element '49' copy and paste as new layer. Resize 50%. Arrange it to the upper right above the leafs.

10. Select layer 'white oval' selections/select all. Selections/float. Selections/Defloat. Match mode: none. Colorize with #000000. Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

11. Select layer 'grey oval' adjust/color balance/manual color correction (source: #c2c2c2 / target: #ffffff). Effects/Texture Effects/Weave (1/5/1/black/black/fill gaps checked).

12. Select layer 'large pink heart' adjust/color balance/manual color correction (source: #e16979 / target: #7f0710).

13. Select the layer 'red strip' adjust/color balance/manual color correction (source: #ad2333 / target: #ffffff). Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

14. Select the layer 'pink strip' adjust/color balance/manual color correction (source: #e57b89 / target: #000000). Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

15. Select the layer 'pink heart' adjust/color balance/manual color correction (source: #e57b89 / target: #000000). Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

16. Select the layer 'red heart' adjust/color balance/manual color correction (source: #ad2333 / target: #7f0710). Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

17. Select the layer 'small hearts' Adjust/add-remove noise/add noise (uniform/50/monochrome checked).

18. Open element '130' copy and paste as new layer, adjust/color balance/manual color correction (source: #bd252b / target: #000000). Resize 80%. Image/Mirror. Arrange it to the left.

19. Open element '18' copy and paste as new layer. Resize 30%. Arrange it to the upper left. Duplicate. Image/Mirror. Arrange it a little bellow the other balloon.

20. Open element '92' copy and paste as new layer. Resize 50%. Arrange it to the right (the heart should be a little above the black strip).

21. Open element '83' copy and paste as new layer. Resize 10%. Arrange it to the right above the bow from the heart we just added.

22. Open element '129' copy and paste as new layer. Resize 40%. Arrange it to the left.

23. Open element '31' copy and paste as new layer. Resize 50%. Image/Mirror. Arrange it to the left above the leafs.

24. Open your tube. I'm using Melinda from Swan Scraps. Resize as you prefer. Arrange it to the left a little above the rose.

25. Add shadow as you like. I used 1-1-65-2 black.

26. Add your copyright.

27. Add your name. I used AR BONNIE / Size: 72.

Save.

Winter Valentine

This one was made using my tutorial.

You can find it here.

== NEW PTU DANCE IN THE RAIN CT TAG ==

Featuring "Winter Valentine" Kit by Dance In The Rain at PicsForDesign - PFD and Smiley Creation Shop. And Featuring "Amy" tube by Swan Scraps at PicsForDesign - PFD.

Dance In The Rain's beautiful kit with 150 elements and 30 papers match for the great tube by Swan Scraps. This kit will also work with many other tubes.

Dance In The Rain kit can be found at:

-> PicsForDesign - PFD, here

-> Smiley Creation Shop, here

Swan Scraps's tube can be found at: 

-> PicsForDesign - PFD, here

In My Heart

== NEW CT DANCE IN THE RAIN PTU TAGS ==

Featuring "In My Heart" Kit by Dancing In The Rain at PicsForDesign and Smiley Creation Shop.

Featuring "Melinda" tube by Swan Scraps at PicsForDesign a gorgeous girl that fits perfectly with any romantic tag.

PTU PU Only Tagger Sized Kit with a Romantic/Valentine's Day Theme.

It has 25 Papers and 145 Elements so you can play with it.

Kit can be found in two stores:

-> PicsForDesign, here

-> Smiley Creation Shop, here

Tube can be found at:

-> PicsForDesign, here

Don't forget to check-out her blog:

Dance In The Rain

Goth Girl ~ by Joanne Salgado

Tutorial written by Joanne Salgado on February 18th, 2015

Any resemblance to any other tutorial is coincidental.

Do not copy and paste this tutorial anywhere on the net.

If you want to translate please ask first. 

Tube: Swan Scraps - you can purchase here 

Kit Little Goth Girl by Dance In The Rain - you can purchase here and here

Template by Melissaz Creationz here 

Font: Bodoni MT Poster Compressed

Don't forget to save often.

1. Open the template 3. Duplicate. Close Original. Delete the first layer.

2. Open your tube. I used Denise from Swans Scraps and resized with 52%. Arrange to the center of the template.

3. Open element 5. Copy and paste as new layer. Resize with 80%. Move this layer down. Will be the last layer. Arrange to the left appearing just the top behind the layer. The lower parts that appears off the template use the eraser tool to clean.

4. Open element 41. Copy and paste as new layer. Resize with 45%. Arrange it to the right appearing behing the template.

5. Open element 26. Copy and paste as new layer. Resize with 80%. Arrange it down as the floor.

6. Select the "merged". Adjust/Add-remove noise/Add noise -uniform/30/monochrome checked.

7. Select the layer right above the merged. Is the half-moon from the template. Effects/Texture Effects/Weave - 1/5/1/white/white/fill gaps checked.

8. Select the layer above this one. Is the other half-moon. Effects/Texture Effects/Weave - 1/5/1/white/white/fill gaps checked.

9. Open element 36. Copy and paste as new layer.

10. Select the layer above the one we just added. Its the grey circles. Adjust/Add-remove noise/Add noise -uniform/30/monochrome checked.

11. Select the layer above this one. Stripes. Adjust/Add-remove noise/Add noise -uniform/30/monochrome checked.

12. Jump the next layer and select "raster 1". Should be the big circles from the template. Effects/Texture Effects/Weave - 1/5/1/black/black/fill gaps checked. Adjust/Add-remove noise/Add noise -uniform/20/monochrome checked.

13. Open element 53. Copy and paste as new layer. Move above the black borders from the big circles.

14. Open element 53. Copy and paste as new layer. Image/Mirror. Arrange it above the floor we added ealier.

15. Open element 37. Copy and paste as new layer. Arrange it to the left in front of the toombstone.

16. Open element 58. Copy and paste as new layer. Arrange it to the right. (if at any point you have doubts see my tag).

17. Open element 32. Copy and paste as new layer. Resize with 80%. Arrange it to the right. I any parts appears bellow the tube clean it with the eraser tool.

18. Open element 18. Copy and paste as new layer. Resize with 35%. Arrange it to the left.

19. Open element 18. Copy and paste as new layer. Resize with 55%. Arrange it to the left. Move this layer above the tube layer.

20. Open element 61. Copy and paste as new layer. Resize with 25%. Arrange it in front of the open book. (see my tag).

Now you can add shadow as you like.

I used 1-1-65-2 black.

Add the copyright.

Add your name.

Save

Little Goth Girl

== NEW CT DANCE IN THE RAIN TUTORIAL ==

Featuring "Little Goth Girl" Kit by Dancing In The Rain at Smiley Creation Shop and Pics For Design - PFD

Tube by Swan Scraps at PFD here

(This beautiful tube has many colors options)

PTU PU Only Tagger Sized Kit with a Goth Theme.

It has 14 Papers and 76 Elements so you can play with it.

Kit can be found in two stores:

-> PicsForDesign, here 

-> Smiley Creation Shop, here

Kiss Me I'm Irish

== NEW CT DANCE IN THE RAIN TAG ==

Featuring "Kiss Me I'm Irish" Kit by Dancing In The Rain at Smiley Creation Shop and Pics For Design - PFD

Tube by Swan Scraps at PFD here

PTU PU Only Tagger Sized Kit with a St. Patrick's Day Theme.

It has 40 Papers and 155 Elements so you can play with it.

Kit can be found in two stores:

-> PicsForDesign, here

-> Smiley Creation Shop, here